Roomba Side Brush Replacement: The Ultimate Guide for DIYers

February 8, 2023 3 minute read

Replacing your Roomba’s side brush is a simple and easy task that can help to keep your robot vacuum running at its best. By following the steps outlined in this comprehensive guide, you’ll be able to replace your Roomba’s side brush and entire side brush module in no time, helping to maintain your Roomba’s cleaning performance and extend its lifespan.

One key component of Roomba maintenance is replacing the side brush, which helps to sweep dirt, debris, and pet hair into the main brush for suction.

Why Replace Your Roomba’s Side Brush?

The Roomba’s side brush is crucial for cleaning edges, corners, and other hard-to-reach areas. Over time, the brush bristles can become bent or worn down, reducing their effectiveness. A worn-out side brush can also cause damage to your Roomba’s motors, as the brush may become tangled or clogged with debris. Replacing your Roomba’s side brush regularly will ensure that it’s always working at its best, helping to keep your home clean and your Roomba running smoothly.

Reference Videos on Brush and Brush Module Replacement for Roomba Vacuums

Here are some videos that may help get your hands dirty:

iRobot Roomba 600 Series

iRobot Roomba 652

iRobot Roomba 770

iRobot Roomba 800 Series

iRobot Roomba 980

iRobot Roomba i3, i3+, i4+, i6, i6+, i7, i7+, i8+

iRobot Roomba e series

iRobot Roomba j7

iRobot S9, S9+

How to Replace Your Roomba’s Side Brush

Replacing your Roomba’s side brush is a simple process that can be done in just a few steps. Here’s how to do it:

Turn off and unplug your Roomba.
Locate the side brush assembly, which is typically located near the edge of the Roomba’s base.
Remove the screws or clips holding the side brush assembly in place.
Take the old side brush out of the assembly.
Insert the new side brush, making sure that it’s properly aligned with the assembly.
Replace the screws or clips to secure the side brush in place.

It’s that simple! With just a few tools and a little bit of know-how, you can easily replace your Roomba’s side brush and keep your robot vacuum running like new.

How to Replace Your Roomba’s Side Brush Module

Replacing the entire side brush module is recommended instead of just the bristles because the module includes the brush and its assembly. The assembly holds the brush in place and ensures that it rotates properly. Over time, the assembly can become worn or damaged, which can cause the brush to become misaligned or stop rotating altogether. By replacing the entire module, you can ensure that the brush is properly installed and functioning correctly. Additionally, some Roomba models may have integrated motors in the side brush assembly, so replacing just the bristles may not be an option. By replacing the entire module, you can ensure that all parts of the side brush are functioning optimally and contributing to your Roomba’s cleaning performance.

See the references above for detailed instructions.

Where to Buy Roomba Side Brush Replacements

Roomba side brush replacements are widely available and can be found at many online retailers, including Amazon, eBay, and the iRobot website. When purchasing a replacement brush, make sure to choose one that’s compatible with your Roomba model. You can find the correct brush by looking up your Roomba’s model number or by consulting the manufacturer’s website.